22/02/251. MicroManager Installation
1) Ndokumbira utore Micro-Manager kubva pazasi link.
https://valelab4.ucsf.edu/~MM/nightlyBuilds/1.4/Windows/
2) Tinya kaviri [MicroManager.exe] faira kuti uise iyo interface yekuisa;
3) Dzvanya iyo [Inotevera>] kuti uise iyo interface yekusarudza kwekuenda.
4) Mushure mekusarudza iyo yekuisa folda uye tinya [Inotevera>]. Tevedza nhanho dzekuisa wizard uye tinya Finish kuti upedze kuisirwa.
2. Mutyairi kurodha nekuisa
Ndokumbirawo udhawunirodhe yazvino sCMOS kamera mutyairi kubva kuTucsen yepamutemo webhusaiti. Tinya kaviri mutyairi akadhawunirodha uye tevera matanho ekuisa wizard.
3. The load camera settings of MicroManager
1) Isa mafaera ese eakapihwa plug-ins mu [C: WindowsSystem32] kana [C: Chirongwa FilesMicro-Manager-1.4].
Iyo 64-bit uye 32-bit plug-ins inofanirwa kuenderana nemazvo.
2) Batanidza simba uye data tambo yekamera.
3) Tinya kaviri chiratidzo cheMicro-Manager kuti uvhure.
4) Bhokisi rebhokisi rinoonekwa rinobvumira mushandisi kusarudza faira kugadzirisa kamera.
5) Tanga kamera kekutanga, sarudza (hapana) kana pasina inoenderana faira yekumisikidza, uye tinya OK.
6) Sarudza [Zvishandiso> Hardware Configuration Wizard] kuisa [Hardware Configuration Wizard] interface. Sarudza [Gadzira gadziriso itsva] wodzvanya [Inotevera >].
7) Nhanho 2 ye6: Wedzera kana kubvisa zvishandiso. Tsvaga [TUCam] muMidziyo Inowanikwa, ivhure uye sarudza [TUCam/TUCSEN Camera]. Dzvanya bhatani re [Wedzera] kuti uise [Chishandiso: TUCam/Library: Tucsen_x64] interface. Dzvanya pakanzi [OK] wobva wadzvanya [Next>].
8) Nhanho 3 ye6: Sarudza zvishandiso uye sarudza auto-shutter marongero. Dzvanya [Inotevera >].
9) Nhanho 4 ye6: Seta kunonoka kwemidziyo isina kuwiriranisa kugona. Dzvanya [Inotevera >].
10) Nhanho 5 ye6: Seta kunonoka kwemidziyo isina kuwiriranisa kugona. Dzvanya [Inotevera >].
11) Nhanho 6 ye6: Chengetedza gadziriro uye kubuda. Zita faira rekugadzirisa uye sarudza chitoro folda. Wobva wadzvanya [Pedzisa].
12) Pinda iyo Micro-Manager inoshanda interface.
13) Dzvanya [Rarama] kuti uise preview mode uye kamera inotakurwa zvinobudirira.
Cherechedza:
Makamera eTucsen parizvino anotsigirwa neMicroManager anosanganisira Dhyana 400D, Dhyana 400DC, Dhyana 95, Dhyana 400BSI, Dhyana 401D uye FL 20BW.
4. Kamera yakawanda
1) MuNhanho 2 ye6 muHardware Configuration, tinya kaviri TUCam kuti utakure kamera yekutanga. Ziva kuti zita harigone kuchinjwa.
2) Dzvanya kaviri TUCam zvakare kurodha yechipiri kamera. Ziva kuti zita harigone kuchinjwa futi.
3) Dzvanya kaviri iyo Multi Kamera muUtilities kuti uiise.
4) Dzvanya Next bhatani kuti upedze kugadzirisa.
5) Tsanangura kutevedzana kwemakamera.
Cherechedza:
1) Paunenge uchishandisa plug-in, ndapota gadziridza iyo 'TUCam.dll' faira mu'C:WindowsSystem32' dhairekitori kune yazvino vhezheni.
2) Kana kugadzirisa kwemakamera maviri kwakasiyana, preview haigone kuitwa panguva imwe chete.
3) 64-bit plug-ins inokurudzirwa.
