22/02/251. Ufakelo lweMicroManager
1) Nceda ukhuphele i-Micro-Manejala kwikhonkco elingezantsi.
https://valelab4.ucsf.edu/~MM/nightlyBuilds/1.4/Windows/
2) Cofa kabini i [MicroManager.exe] ifayile ukufaka ujongano lofakelo;
3) Cofa i [Elandelayo>] ukufaka ujongano lokukhetha indawo ekuyiwa kuyo.
4) Emva kokukhetha ifolda yokufaka kwaye ucofe [Okulandelayo>]. Landela amanyathelo ewizadi yokuhlohla kwaye ucofe kuGqiba ukugqiba ukufakelo.
2. Ukukhuphela nokufakwa komqhubi
Nceda ukhuphele umqhubi wekhamera ye-sCMOS yamva nje kwiwebhusayithi esemthethweni yaseTucsen. Cofa kabini umqhubi okhutshelweyo kwaye ulandele amanyathelo ewizadi yokuhlohla.
3. Ukulayisha useto lwekhamera ye-MicroManager
1) Beka zonke iifayile zeplug-ins ezibonelelweyo kwi- [C:WindowsSystem32] okanye [C:Iifayile zeNkqubo yeMicro-Manager-1.4].
I-plug-ins ye-64-bit kunye ne-32-bit kufuneka ihambelane ngokuchanekileyo ngokulandelelanayo.
2) Xhuma amandla kunye nekhebula ledatha yekhamera.
3) Cofa kabini i icon ye-Micro-Manager ukuyivula.
4) Ibhokisi yencoko yababini ibonakala ivumela umsebenzisi ukuba akhethe ifayile ukulungisa ikhamera.
5) Qala ikhamera okokuqala, khetha (akukho nanye) ukuba akukho fayile yoqwalaselo ehambelanayo, kwaye nqakraza OK.
6) Khetha [Izixhobo>IWizadi yoLungiso lweHardware] ukufaka [iWizadi yoLungiso lweHardware] ujongano. Khetha [Yenza ulungelelwaniso olutsha] kwaye ucofe [Okulandelayo >].
7) Inyathelo lesi-2 lesi-6: Yongeza okanye ususe izixhobo. Fumana i [TUCam] kwiZixhobo ezifumanekayo, yivule kwaye ukhethe [TUCam/TUCSEN Camera]. Cofa iqhosha elithi [Yongeza] ukufaka [Isixhobo: TUCam/Library: Tucsen_x64] ujongano. Cofa u-[Kulungile] uze ucofe [Okulandelayo >].
8) Inyathelo lesi-3 lesi-6: Khetha izixhobo ezingagqibekanga kwaye ukhethe ukusetwa kwe-auto-shutter. Cofa [Okulandelayo >].
9) Inyathelo lesi-4 lesi-6: Cwangcisa ukulibaziseka kwezixhobo ngaphandle kwesakhono songqamaniso. Cofa [Okulandelayo >].
10) Inyathelo lesi-5 lesi-6: Seta ukulibaziseka kwezixhobo ngaphandle kwesakhono songqamaniso. Cofa [Okulandelayo >].
11) Inyathelo lesi-6 lesi-6: Gcina ubumbeko kwaye uphume. Xela ifayile yoqwalaselo kwaye ukhethe ifolda yokugcina. Kwaye emva koko ucofe i [Gqiba].
12) Ngena i-Micro-Manager yokusebenza ujongano.
13) Cofa [Live] ukufaka imowudi yokujonga kwaye ikhamera ilayishwe ngempumelelo.
Phawula:
Iikhamera zeTucsen okwangoku zixhaswa yi-MicroManager ziquka i-Dhyana 400D, i-Dhyana 400DC, i-Dhyana 95, i-Dhyana 400BSI, i-Dhyana 401D kunye ne-FL 20BW.
4. Iikhamera ezininzi
1) KwiNyathelo 2 ye-6 kwi-Hardware Configuration, nqakraza kabini i-TUCam ukulayisha ikhamera yokuqala. Qaphela ukuba igama alinakutshintshwa.
2) Cofa kabini iTUCam kwakhona ukulayisha ikhamera yesibini. Qaphela ukuba igama alinakutshintshwa, nalo.
3) Cofa kabini iKhamera eMulti kwii-Utility ukuyilayisha.
4) Cofa iqhosha elilandelayo ukugqiba uqwalaselo.
5) Chaza ukulandelelana kweekhamera.
Phawula:
1) Xa usebenzisa iplagi, nceda uhlaziye ifayile ye-'TUCam.dll' kwi-'C:WindowsSystem32' directory ukuya kuguqulelo lwamva nje.
2) Ukuba isisombululo seekhamera ezimbini sahlukile, ukubonwa kwangaphambili akunakwenziwa ngexesha elinye.
I-3) i-plug-ins ye-64-bit iyacetyiswa.
